Designed for surface cleaning, descaling and glass, aluminum alloy and other decorative surfaces for sandblasting and marble engraving. Be used on Sandblasting machine. This Sandblasting gun needs to connect 13mm blasting hose and air hose.
Description Composite Air Sand Blaster Specification *Gravity Feed Blaster *Top Mounted Hopper *Round Nozzle Allows Spot Rust Removal *Light Weight ABS Plastic Body *Working Pressure: 90psi *Air Inlet: 1/4″ NPT *Hopper: 9oz Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items, and we ship from our warehouse. Most orders are shipped the same or next business day after payment received. We ship with Fedex ground or with the US Postal Service to physical addresses. Some items may be shipped to PO Boxes, Please inquire before bidding if po box is a must. Please inquire before bidding any shipping questions or quotes that are not shown on listing. Shipping to VI, GU, MP, APO/FPO, Canada and other international is available. All items are insured at no extra cost for all international shipments. In the event the item is damaged or lost the buyer will receive an affidavit stating the item was not received or damaged when received. The affidavit will need to be signed and returned to the insurance agency. Once the affidavit it received at the insurance agency a full refund will be processed. Shipping time for priority mail international shipping can take up to 2-4 weeks in some cases. Normal shipping time is 6-14 days but packages can be flagged in customs. Any custom fees or taxes or any other fees associated with international shipping is solely the buyers responsibility and should be researched by the buyer in advance of making any purchase.
Portable air sand blaster gun with 750cc media cup. Ideal for cleaning rust, old paint, and surface buildup on metal parts, automotive frames, concrete, tools, and equipment. Use with air compressor and safety gear.
Doing that is against U.S. and international laws. grease and other dirt from the surface of a material but maintain the integrity of the substrate materials.
Product OverviewThis CENTRAL MACHINERY™ portable abrasive blaster kit comes with a blast gun, 15 ft. material hose, and hopper that can hold up to 50 lb. of abrasive media, including steel grit, glass beads, pecan shells, and more. Hook it up to a 1 HP or larger compressor to easily remove paint, rust, graffiti, corrosion, and scale. A 3 mm hex key is included. 50 lb. blasting media capacityEasy-carry handleIncludes 15 ft. material hoseCompatible with 1 HP or larger compressors* Specifications SKU(s):59483Brand:CENTRAL MACHINERYAccessories Included:Blast gun, hopper, material hose, and 3mm hex keyAir Inlet Size:1/4 in.Air Consumption:12 CFM @ 90 PSIHose Length:15 ft.Maximum Pressure (PSI):120 PSIShipping Weight:6.05 lb.Working Pressure (psi):90 PSI
Doing that is against U.S. and international laws. grease and other dirt from the surface of a material but maintain the integrity of the substrate materials.
Doing that is against U.S. and international laws. grease and other dirt from the surface of a material but maintain the integrity of the substrate materials.
LARGE REPLACEMENT SANDBLASTER NOZZLE ASSEMBLY: Included is a large premium quality ceramic nozzle, nozzle holder and a 3/4″ stainless steel NPT ball valve for long-lasting life. Replace your existing nozzle holder with this system utilizing large 3-3/4″ nozzles!OUTLASTS SMALL NOZZLES SEVERAL TIMES: INDUSTRIAL GRADE system can be used for larger pressure pot sandblasting systems or to convert smaller garage style pot systems such as Clarke and Harbor Freight.ALUMINUM OXIDE CERAMIC TIP: Our secret to longer blasting times is through the use of the included alumina oxide tip which measures 3-3/4″ (95.3mm) long which provides more material to wear through. Our premium grade tips are higher-density, that outlast several times longer than other Chinese imitations.HIGH QUALITY, HIGH PERFORMANCE: All ceramic nozzles are not equal — Kennametal nozzles feature premium grade material. Don’t waste your money on inferior products which end up costing you more money. We offer replacement C1 tips also when the time comes to need another. KENNAMETAL QUALITY & USA Assembled: These sandblaster nozzles are professionally assembled by SandblasterINFO and ceramic tip included is manufactured by one of the highest respected USA companies providing unsurpassed wear resistance in abrasion. Forget Brass Ball Valves! Unlike other systems utilizing soft, brass ball valves, ours uses full stainless steel construction for longer life. Large Heavy Duty Sandblasting Nozzle with Tip, Ball Valve & Nozzle Holder Rest at ease knowing that you will not have to change your nozzle system as often, which in turn saves you money in the long run. Our high quality nozzle configuration is assembled with larger parts for higher volume abrasive blasting. However, if you have a smaller garage style pressure pot sandblaster, you can also take advantage of the long lasting effects of the large, long length ceramic nozzle tip. Simply select a smaller Inner Diameter (ID) to reduce the volume of abrasive coming out. This is a great solution for converting your Harbor Freight, Clarke or other garage sized blaster into a better system with this long-lasting nozzle. C1 Series Ceramic Nozzles Provide Great Wear-Resistance! Included is a premium USA-MADE ceramic sandblaster nozzles that last longer than others. C1 Series Nozzle Tips Measure 3.75 inches long. Large end measures 1.125″ in outer diameter tapered to .63″ in outer diameter at tip end. Select Inner Diameter Bore from Smallest to Largest: 3/32″ ID (2.4 mm)1/8″ ID (3.2 mm)5/32″ ID (4 mm)3/16″ ID (4.8 mm)1/4″ ID (6.4 mm)5/16″ ID (7.9 mm)3/8″ ID (9.5 mm) Note: Pictures only show the one ID bore but we offer all seven sizes. Reduce Nozzle Replacement Costs Kennametal’s nozzle replacements may cost more initially, but provide much longer service life. The per-hour cost with Kennametal nozzles can be a fraction of the cost of cheaper nozzles. Long-term, these nozzles will actually save you money, while requiring you to stop less often in the middle on projects and ordering replacements. Longer nozzle life enables you to experience greater dimensional accuracy, faster abrasive cleaning speeds, and less downtime for replacement — increasing the productivity of your applications. Kennametal is known as « The Wear Parts Experts ». There mission is to offer outstanding performance and value in everything they do. As a global leader in complex metallurgy and material science, their resources allow them to solve your most complex wear and performance problems. Advanced materials, innovative design, and an uncompromising adherence to rigorous quality-control procedures have made Kennametal the industry benchmark for cost-effective performance. Overall Size of Abrasive Blasting Assembly The whole assembly measures roughly 7.75″ long. Uses 3/4″ NPT ball valve which can be converted for use on all size pressurized blasters with the use of a reducer which can be found at local hardware stores. Most Harbor Freight systems use a 3/8″ NPT so a reducer 3/4″ NPT to 3/8″ NPT may be needed. Please contact us if you need a reducer.
Paasche AEC-K Air Eraser – Abrasive Etching Tool The air eraser can be used anywhere an abrasive is required to delicately erase; such as decorative etching on glass. Can also be used by the professional technician, manufacturer, hobbyist or for dental lab work, erasing color, and removing rust. Requires a compressor 1/3 HP or larger that can deliver up to 70 PSI. AEC-K Includes: AEC etcher, 6 oz bottle of aluminum oxide, dust mask, 6′ braided hose & Manual. Features: • AEC Made In The USA • Stainless steel tip with carbide insert for long life • Gravity feed cup with cover • Chrome plated shell Specs: Part Number: AEC-K Type: Abrasive sprayer for etching Head Size: 0.60mm Abrasives: Any size up to 240 grit Air Pressure: 20-75 PSI @ .5 CFM Air Inlet: Paasche thread – adapters available Bottle size: 3/4 ounce Spray Pattern: Pencil line up to 1/4 inch Weight: 1 Lbs Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.The air eraser can be used anywhere an abrasive is required to delicately erase; such as decorative etching on glass. Can also be used by the professional technician, manufacturer, hobbyist or for dental lab work, erasing color, and removing rust. Requires a compressor 1/3 HP or larger that can deliver up to 70 PSI. AEC-K Includes: AEC etcher, 6 oz bottle of aluminum oxide, dust mask, 6′ braided hose & Manual. Features: • AEC Made In The USA • Stainless steel tip with carbide insert for long life • Gravity feed cup with cover • Chrome plated shell Specs: Part Number: AEC-K Type: Abrasive sprayer for etching Head Size: 0.60mm Abrasives: Any size up to 240 grit Air Pressure: 20-75 PSI @ .5 CFM Air Inlet: Paasche thread – adapters available Bottle size: 3/4 ounce Spray Pattern: Pencil line up to 1/4 inch Weight: 1 Lbs Paasche AEC-K Air Eraser – Abrasive Etching Tool The air eraser can be used anywhere an abrasive is required to delicately erase; such as decorative etching on glass. Can also be used by the professional technician, manufacturer, hobbyist or for dental lab work, erasing color, and removing rust. Requires a compressor 1/3 HP or larger that can deliver up to 70 PSI. AEC-K Includes: AEC etcher, 6 oz bottle of aluminum oxide, dust mask, 6′ braided hose & Manual. Features: • AEC Made In The USA • Stainless steel tip with carbide insert for long life • Gravity feed cup with cover • Chrome plated shell Specs: Part Number: AEC-K Type: Abrasive sprayer for etching Head Size: 0.60mm Abrasives: Any size up to 240 grit Air Pressure: 20-75 PSI @ .5 CFM Air Inlet: Paasche thread – adapters available Bottle size: 3/4 ounce Spray Pattern: Pencil line up to 1/4 inch Weight: 1 Lbs Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping. Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. The air eraser can be used anywhere an abrasive is required to delicately erase; such as decorative etching on glass. Can also be used by the professional technician, manufacturer, hobbyist or for dental lab work, erasing color, and removing rust. Requires a compressor 1/3 HP or larger that can deliver up to 70 PSI. AEC-K Includes: AEC etcher, 6 oz bottle of aluminum oxide, dust mask, 6′ braided hose & Manual. Features: • AEC Made In The USA • Stainless steel tip with carbide insert for long life • Gravity feed cup with cover • Chrome plated shell Specs: Part Number: AEC-K Type: Abrasive sprayer for etching Head Size: 0.60mm Abrasives: Any size up to 240 grit Air Pressure: 20-75 PSI @ .5 CFM Air Inlet: Paasche thread – adapters available Bottle size: 3/4 ounce Spray Pattern: Pencil line up to 1/4 inch Weight: 1 Lbs
28-Gallon Vacuum Sand Blaster with 1200W Built-In Dustless Vacuum System. This portable 28-gallon abrasive blasting unit combines high-efficiency performance with a built-in 1200W vacuum system to provide a cleaner, more effective blasting experience.