Free-standing Ryobi 18v One+ Modular 6 Battery Holder Tower garage tool storage
Specifications
| All Returns Accepted | ReturnsNotAccepted |
| Brand | Unbranded |
| Mounting | Free Standing |
| Type | Tools Organizer |
| Color | Black |
| Model | Free standing |
| Country/Region Of Manufacture | United States |
Free-standing Ryobi 18v One+ Modular 6 Battery Holder Tower garage tool storage. This is a vertical battery storage system for Ryobi 18v One+ Batteries that is a Standalone Tower. Each Shaft holds 2 Ryobi 18v One+ Batteries that slide in at a 10-degree angle with a slight gap between them. Shaft pieces connect to each other with included screw & nut. There is an additional Top and Base to complete your assembly. The Base is designed to sit or mount on a surface. There are tapered screw holes if you wish to mount it (screws for that are not included). We recommend you store heavier batteries at the bottom and lighter batteries at the top. Due to the weight of the batteries, we do not recommend holding over 6 batteries (3 Shafts) as sold in this bundle. The base is strong and sturdy, but adding more shafts would stack too many batteries is not recommended due to their combined weight. The Bundle for this Standalone Tower includes: 1 Base, 3 Shafts, and 1 TopNote: The Parts Diagram illustrates what is contained in the Standalone Bundle, but also shows mounting for Wall Mounted and Ryobi Link Wall Rails, which are sold separately. Assembly Instructions: You will need a screwdriver (not included). See parts diagram for reference.1. Remove screws and nuts and note how they were installed for shipping2. Determine your layout/arrangement before assembly.3. Assemble the parts together before mounting them (to a wall or Link). Screw parts together to be tight with included screw & nut. Nuts have hexagonal holes on the back of each part and screws go in the tapered holes from the front. Additional installation notes:- for additional strength or rigidity, you may superglue the shafts together (but this is optional and obviously cannot then be disassembled). If doing this, you should screw pieces together first without glue to check, disassemble, glue, then reassemble after the glue is sets up and is strong. Part Dimensions:- Shaft: 3.23" x 6" x 2.25" (82mm x 155mm x 58mm), 5.5” (140mm) modular height- Top: 2.7" x 0.8" x 2" (68mm x 20mm x 52mm), 0.8” (20mm) modular height- Base: 9.2" x 6.6" x 2.7" (233mm x 168mm x 71mm), 2.2" (56mm) modular height6-Battery Standalone Tower Bundle Height (contains 3 Shafts): 19.5” (496mm) Parts are 3D-printed in black PLA plastic and due to the printing process there may be some minor imperfections (which are mostly likely to be on the back side, not exposed to view). Batteries shown in photos are for reference only and NOT included.
Related Items
![[New]50-Amp Generator Extension Cord,50 Foot,250 Volts 12500 Watts Heavy Duty Po](https://wikibricolage.com/images/DxMAAeSw80RqItZe/new-50-amp-generator-extension-cord-50-2-240.webp)
